| Part Number : D178618C1880 | Manufacturer : Aerovox Corp | ||
| NSN : 5905-00-299-7995 (5905002997995) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 00656 | ||
| NIIN : 00-299-7995 (002997995) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number D178618C1880, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Aerovox Corp and listed alongside the NSN 5905002997995, part number D178618C1880 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : D178618C1880 | Manufacturer : Aerovox Corp | ||
| NSN Number : 5905-00-299-7995 (5905002997995) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 00656 | ||
| NIIN : 002997995 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number D178618C1880, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Aerovox Corp and listed alongside the NSN 5905002997995, part number D178618C1880 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-299-7995 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 002997995 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GA10684C1880 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | 55.0 TO 105.0 |
| AAPP | ELECTRICAL RESISTANCE | 188.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 121.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | 0.0 TO 60.0 |
| AAQZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 66.0 DEG CELSIUS |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 64959-GA10684 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
