| Part Number : 4363219 | Manufacturer : Agco Corp | ||
| NSN : 3020-00-216-7433 (3020002167433) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 00-216-7433 (002167433) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4363219, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020002167433, part number 4363219 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4363219 | Manufacturer : Agco Corp | ||
| NSN Number : 3020-00-216-7433 (3020002167433) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 002167433 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 4363219, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020002167433, part number 4363219 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-216-7433 Item PartTypeName: GEAR,HELICAL | 3020 | 002167433 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1877-2087 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 10.0760 INCHES MINIMUM AND 10.0800 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 72 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 10.321 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 26.8333 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.687 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.5003 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.3140 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.8990 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.250 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.2115 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.781 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.476 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.437 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
