| Part Number : 4340114 | Manufacturer : Agco Corp | ||
| NSN : 3020-00-391-4048 (3020003914048) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 00-391-4048 (003914048) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4340114, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020003914048, part number 4340114 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4340114 | Manufacturer : Agco Corp | ||
| NSN Number : 3020-00-391-4048 (3020003914048) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 003914048 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 4340114, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020003914048, part number 4340114 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-4048 Item PartTypeName: GEAR,HELICAL | 3020 | 003914048 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4340114 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AGJS | PITCH DIAMETER | 7.8351 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 20.0 ROCKWELL C MINIMUM OVERALL AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.0751 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 30.5133 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.280 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.253 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.780 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.375 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES,0.375-16 UNC 2B THD,ON BODY OF GEAR,TIMING MARK 89 DEG 24 MIN 40 SEC FROM CENTER LINE OF KEYWAY ON FACE OF GEAR NEXT TO TEETH |
| MATT | MATERIAL | IRON OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 122 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
