| Part Number : DE40114 | Manufacturer : Agco Corp | ||
| NSN : 3020-00-391-4048 (3020003914048) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 00-391-4048 (003914048) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number DE40114, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020003914048, part number DE40114 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
DE41
Sorensen Industries Inc NSN: 2920-01-281-5281 CAGE Code: 2Y338 |
DE40190
Agco Corp NSN: 5307-00-207-1348 CAGE Code: 6N299 |
|
DE40010
Agco Corp NSN: 5342-00-423-7278 CAGE Code: 6N299 |
DE41066
Agco Corp NSN: 2990-00-325-3711 CAGE Code: 6N299 |
|
DE41675
Agco Corp NSN: 5325-00-663-2290 CAGE Code: 6N299 |
DE40945P
Agco Corp NSN: 2815-00-361-9922 CAGE Code: 6N299 |
|
DE40075
Agco Corp NSN: 2815-00-352-3185 CAGE Code: 6N299 |
DE4217
Agco Corp NSN: 5306-00-361-9919 CAGE Code: 6N299 |
|
DE41504
Allis Chalmers Corp NSN: 3120-00-509-3576 CAGE Code: 92392 |
DE4-474
Electron Products Inc NSN: 5910-00-985-2109 CAGE Code: 99515 |
|
DE40317
Hoist Liftruck Mfg Inc NSN: 2805-00-590-1022 CAGE Code: 54845 |
DE41245P
Agco Corp NSN: 2815-00-361-9922 CAGE Code: 6N299 |
|
DE40-2
Parks Cramer Co NSN: 4420-00-244-7001 CAGE Code: 77124 |
DE40-2
Bethlehem Steel Corp NSN: 4420-00-244-7001 CAGE Code: 70983 |
|
DE4011
Resource Recovery Systems Inc NSN: 4330-01-400-3393 CAGE Code: 01HR2 |
DE40317
Agco Corp NSN: 2805-00-590-1022 CAGE Code: 6N299 |
| Part Number : DE40114 | Manufacturer : Agco Corp | ||
| NSN Number : 3020-00-391-4048 (3020003914048) | |||
| Item Name : Gear Helical | CAGE Code : 6N299 | ||
| NIIN : 003914048 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number DE40114, that of which is listed with the description Gear Helical; Manufactured by Agco Corp and listed alongside the NSN 3020003914048, part number DE40114 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-4048 Item PartTypeName: GEAR,HELICAL | 3020 | 003914048 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4340114 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AGJS | PITCH DIAMETER | 7.8351 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 20.0 ROCKWELL C MINIMUM OVERALL AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.0751 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 30.5133 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.280 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.253 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.780 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.375 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES,0.375-16 UNC 2B THD,ON BODY OF GEAR,TIMING MARK 89 DEG 24 MIN 40 SEC FROM CENTER LINE OF KEYWAY ON FACE OF GEAR NEXT TO TEETH |
| MATT | MATERIAL | IRON OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 122 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
