| Part Number : 5306-005-3D4H | Manufacturer : Aidc Aerospace Industrial | ||
| NSN : 5305-01-382-0693 (5305013820693) | |||
| Item Name : Screw Close Tolerance | CAGE Code : S7549 | ||
| NIIN : 01-382-0693 (013820693) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 53060053D4H | |||
Thank you for taking an interest in part number 5306-005-3D4H, that of which is listed with the description Screw Close Tolerance; Manufactured by Aidc Aerospace Industrial and listed alongside the NSN 5305013820693, part number 5306-005-3D4H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5306-005-3D4H | Manufacturer : Aidc Aerospace Industrial | ||
| NSN Number : 5305-01-382-0693 (5305013820693) | |||
| Item Name : Screw Close Tolerance | CAGE Code : S7549 | ||
| NIIN : 013820693 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 5306-005-3D4H, that of which is listed with the description Screw Close Tolerance; Manufactured by Aidc Aerospace Industrial and listed alongside the NSN 5305013820693, part number 5306-005-3D4H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-382-0693 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013820693 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5306-005-3D4H | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| AASA | THREAD LENGTH | 0.363 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.613 INCHES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.473 INCHES NOMINAL FIRST HOLE |
| AGAV | III END ITEM IDENTIFICATION | PACER DAWN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWU | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | ANEE AND AAUR |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 NATIONAL SPEC 1ST TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.128 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
