| Part Number : MS25038-4 | Manufacturer : Aircraft Appliances And Equipment | ||
| NSN : 6680-00-553-8892 (6680005538892) | |||
| Item Name : Generator Tachometer | CAGE Code : 35076 | ||
| NIIN : 00-553-8892 (005538892) | |||
| FSC Code : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
| FSG Code : 66 Instruments and Laboratory Equipment | |||
| INC Code : 20241 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS250384 | |||
Thank you for taking an interest in part number MS25038-4, that of which is listed with the description Generator Tachometer; Manufactured by Aircraft Appliances And Equipment and listed alongside the NSN 6680005538892, part number MS25038-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 star hose and supply inc
CAGE Code: 079J5 |
3w interface corp
CAGE Code: 4V367 |
|
2kr systems llc
CAGE Code: 730Z2 |
1st team installations llc
CAGE Code: 3FSE9 |
|
3 vets inc
CAGE Code: 1MK20 |
3m belgium nv
CAGE Code: B2281 |
|
3ps inc
CAGE Code: 1MHK2 |
1st american metals inc
CAGE Code: 0MP49 |
|
394 test maintenance squadron sac
CAGE Code: 33044 |
1343080 alberta ltd
CAGE Code: L0796 |
|
2001 humana press inc
CAGE Code: 34CH3 |
3d
CAGE Code: 0WY47 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
| Part Number : MS25038-4 | Manufacturer : Aircraft Appliances And Equipment | ||
| NSN Number : 6680-00-553-8892 (6680005538892) | |||
| Item Name : Generator Tachometer | CAGE Code : 35076 | ||
| NIIN : 005538892 | |||
| FSC CODE : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
Thank you for taking an interest in part number MS25038-4, that of which is listed with the description Generator Tachometer; Manufactured by Aircraft Appliances And Equipment and listed alongside the NSN 6680005538892, part number MS25038-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | Mounting Method | PAD |
| ABWV | Shaft Diameter | 0.310 INCHES MINIMUM SINGLE END AND 0.312 INCHES MAXIMUM SINGLE END |
| BKPC | Calibration Voltage Output Type In Volts | 21.0 AC |
| MRC | Decoded Requirement | Clear Text Reply |
| BFLQ | Calibration Speed In Rpm | 4200 |
| CBBL | Features Provided | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| TEST | Test Data Document | 81349-MIL-G-9398 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CWCS | Length Of Shaft From Housing | 0.467 INCHES SINGLE END |
| AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
| AKCT | Shaft Rotation Direction | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| CWGD | Nominal Center To Center Distance Between Mounting Facilities Parallel To Height | 1.876 INCHES |
| CWFX | Rotor Speed Rating In Rpm | 5500.0 SINGLE FULL LOAD |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 1.876 INCHES |
| TTQY | Terminal Type And Quantity | 1 CONNECTOR, PLUG |
| ABXQ | Flatted Portion Length | 0.431 INCHES MINIMUM SINGLE END AND 0.503 INCHES MAXIMUM SINGLE END |
| AAJU | Overall Length | 4.312 INCHES |
| ASDB | Width Across Flats | 0.243 INCHES MINIMUM SINGLE END AND 0.245 INCHES MAXIMUM SINGLE END |
| CWHZ | Shaft End Characteristic | A15 SINGLE STYLE SINGLE END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
