| Part Number : AN-47SPL | Manufacturer : Airglas Inc | ||
| NSN : 5306-00-003-5274 (5306000035274) | |||
| Item Name : Bolt Eye | CAGE Code : 17564 | ||
| NIIN : 00-003-5274 (000035274) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01853 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AN47SPL | |||
Thank you for taking an interest in part number AN-47SPL, that of which is listed with the description Bolt Eye; Manufactured by Airglas Inc and listed alongside the NSN 5306000035274, part number AN-47SPL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN-47SPL | Manufacturer : Airglas Inc | ||
| NSN Number : 5306-00-003-5274 (5306000035274) | |||
| Item Name : Bolt Eye | CAGE Code : 17564 | ||
| NIIN : 000035274 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN-47SPL, that of which is listed with the description Bolt Eye; Manufactured by Airglas Inc and listed alongside the NSN 5306000035274, part number AN-47SPL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-003-5274 Item PartTypeName: BOLT,EYE | 5306 | 000035274 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN-47SPL | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.609 INCHES MINIMUM AND 0.629 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.100 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AATR | SHANK LENGTH | 3.849 INCHES MINIMUM AND 3.889 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.007 INCHES MINIMUM AND 5.167 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 4.589 INCHES NOMINAL |
| CWXM | EYE OUTSIDE WIDTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ROUND,CLOSED W/SHOULDER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
