| Part Number : TX1026V3-8A | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN : 5305-01-462-2861 (5305014622861) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 01-462-2861 (014622861) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026V38A | |||
Thank you for taking an interest in part number TX1026V3-8A, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305014622861, part number TX1026V3-8A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026V3-8A | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN Number : 5305-01-462-2861 (5305014622861) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 014622861 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026V3-8A, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305014622861, part number TX1026V3-8A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-462-2861 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014622861 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11827V3-8A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | 0.500 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.373 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| AASB | FASTENER LENGTH | 0.830 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASU | HEAD HEIGHT | 0.084 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.111 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | USED ON FA-18 E&F |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
