| Part Number : TX1027C5-14AF | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN : 5305-01-512-8325 (5305015128325) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 01-512-8325 (015128325) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1027C514AF | |||
Thank you for taking an interest in part number TX1027C5-14AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305015128325, part number TX1027C5-14AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 source electronic components inc
CAGE Code: 3FY68 |
3m purification inc
CAGE Code: 15472 |
|
1spatial ltd
CAGE Code: U3518 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
184th air refueling wing
CAGE Code: 3EP27 |
4 seasons counting systems inc
CAGE Code: 0MHX5 |
|
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
2415779 ontario inc
CAGE Code: L09L7 |
|
1 nation technology corp
CAGE Code: 08DH5 |
4 star hose and supply inc
CAGE Code: 079J5 |
|
3 ring inc
CAGE Code: 68310 |
3m company communication markets
CAGE Code: 0VGY3 |
|
10zig technology inc
CAGE Code: 49E04 |
| Part Number : TX1027C5-14AF | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN Number : 5305-01-512-8325 (5305015128325) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 015128325 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1027C5-14AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305015128325, part number TX1027C5-14AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-512-8325 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015128325 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11845C5-14AF | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TYPE II,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.313 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| AASB | FASTENER LENGTH | 2.204 INCHES MINIMUM AND 2.234 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
