| Part Number : TX1026C3D8A | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN : 5305-01-513-8797 (5305015138797) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 01-513-8797 (015138797) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TX1026C3D8A, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305015138797, part number TX1026C3D8A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026C3D8A | Manufacturer : Alcoa Fastening Systems Ltd | ||
| NSN Number : 5305-01-513-8797 (5305015138797) | |||
| Item Name : Screw Close Tolerance | CAGE Code : C4293 | ||
| NIIN : 015138797 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026C3D8A, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Fastening Systems Ltd and listed alongside the NSN 5305015138797, part number TX1026C3D8A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-513-8797 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015138797 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11827C3D8A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.345 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.189 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.372 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AGAV | III END ITEM IDENTIFICATION | FIGHTER AIRCRAFT-FIRST (F18 E/F) |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 0.830 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
