| Part Number : VT1049-3-16 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-432-7879 (5305004327879) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-432-7879 (004327879) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VT1049316 | |||
Thank you for taking an interest in part number VT1049-3-16, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004327879, part number VT1049-3-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VT1049-3-16 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-432-7879 (5305004327879) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 004327879 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number VT1049-3-16, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004327879, part number VT1049-3-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-432-7879 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004327879 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VT1049-3-16 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| MATT | Material | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
| AASK | Head Style | PAN |
| AASA | Thread Length | 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNF |
| CSYM | Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASL | Head Diameter | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| AAWB | Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASB | Fastener Length | 1.323 INCHES MINIMUM AND 1.353 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| MRC | Decoded Requirement | Clear Text Reply |
| CSYM | Surface Finish | 32.0 MICROINCHES THREADS |
| MDCL | Material Document And Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 1.150 INCHES MINIMUM FIRST HOLE AND 1.200 INCHES MAXIMUM FIRST HOLE |
| AASU | Head Height | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ANEE | Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 32 |
| AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| CSYM | Surface Finish | 32.0 MICROINCHES GRIP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
