| Part Number : HT1029A4T3 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-450-7449 (5305004507449) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-450-7449 (004507449) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HT1029A4T3, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004507449, part number HT1029A4T3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT1029A4T3 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-450-7449 (5305004507449) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 004507449 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT1029A4T3, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004507449, part number HT1029A4T3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-450-7449 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 004507449 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4N-3D | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.442 INCHES MINIMUM AND 0.509 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.640 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 248.0 BRINELL STANDARD MINIMUM OVERALL AND 341.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.500 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
