| Part Number : VT1657-4-13 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-465-5488 (5305004655488) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-465-5488 (004655488) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VT1657413 | |||
Thank you for taking an interest in part number VT1657-4-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004655488, part number VT1657-4-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VT1657-4-13 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-465-5488 (5305004655488) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 004655488 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number VT1657-4-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004655488, part number VT1657-4-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-465-5488 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004655488 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VT1657-4-13 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| ANEE | Grip Length | 0.345 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AASK | Head Style | FLAT COUNTERSUNK |
| CSYM | Surface Finish | 32.0 MICROINCHES GRIP |
| MATT | Material | STEEL COMP H11 OVERALL |
| CQFM | Hardness Rating | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| FEAT | Special Features | HEXEGON RECESS,THREAD END 0.1270 IN. MIN,0.1295 IN. MAX ACROSS FLATS 0.125 IN. DEEP |
| CQBC | Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH |
| AASB | Fastener Length | 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| AASL | Head Diameter | 0.492 INCHES MINIMUM AND 0.512 INCHES MAXIMUM |
| AASA | Thread Length | 0.475 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNJF |
| CMLP | Thread Quantity Per Inch | 28 |
| AAUR | Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
| CSYM | Surface Finish | 32.0 MICROINCHES THREADS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
