| Part Number : VS2545T4F19T | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-487-5092 (5305004875092) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-487-5092 (004875092) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number VS2545T4F19T, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004875092, part number VS2545T4F19T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VS2545T4F19T | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-487-5092 (5305004875092) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 004875092 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number VS2545T4F19T, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305004875092, part number VS2545T4F19T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-487-5092 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004875092 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VS2545T4F19T | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.341 INCHES MINIMUM AND 1.371 INCHES MAXIMUM FIRST HOLE |
| AASA | THREAD LENGTH | 0.266 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM FIRST HOLE |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| ANEE | GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.502 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 1.464 INCHES MINIMUM AND 1.511 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
