| Part Number : HT1029A5-8 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-799-2008 (5305007992008) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-799-2008 (007992008) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: HT1029A58 | |||
Thank you for taking an interest in part number HT1029A5-8, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305007992008, part number HT1029A5-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT1029A5-8 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-799-2008 (5305007992008) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 007992008 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT1029A5-8, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305007992008, part number HT1029A5-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-799-2008 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 007992008 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 54291-5-8 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.016 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3115 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASL | HEAD DIAMETER | 0.602 INCHES MINIMUM AND 0.634 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
