| Part Number : VP1072-4-14 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-00-901-4400 (5305009014400) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-901-4400 (009014400) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VP1072414 | |||
Thank you for taking an interest in part number VP1072-4-14, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305009014400, part number VP1072-4-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
12 volt shop
CAGE Code: Z0JM2 |
|
0mcc inc
CAGE Code: 12156 |
4 ld inc
CAGE Code: 0ACW5 |
|
1 source electronics inc
CAGE Code: 551K1 |
3h industries inc
CAGE Code: 60754 |
|
4m sigma corporation
CAGE Code: 0BC31 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
2001 micro systemation ab
CAGE Code: SK396 |
4 cs electronic packaging inc
CAGE Code: 60744 |
|
184th air refueling wing
CAGE Code: 3EP27 |
2mb international
CAGE Code: FA7N3 |
|
43 apple hill llc
CAGE Code: 6AKU8 |
3m alaska
CAGE Code: 0NZU5 |
|
3d pep
CAGE Code: FB830 |
| Part Number : VP1072-4-14 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-00-901-4400 (5305009014400) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 009014400 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number VP1072-4-14, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305009014400, part number VP1072-4-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-901-4400 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 009014400 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 202-15500-4-14 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.428 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.303 INCHES NOMINAL |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.875 INCHES MINIMUM AND 0.981 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.198 INCHES MINIMUM FIRST HOLE AND 1.218 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
