| Part Number : CA2193-4-13 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-189-7460 (5305011897460) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 29372 | ||
| NIIN : 01-189-7460 (011897460) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CA2193413 | |||
Thank you for taking an interest in part number CA2193-4-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305011897460, part number CA2193-4-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CA2193-4-13 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-189-7460 (5305011897460) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 29372 | ||
| NIIN : 011897460 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number CA2193-4-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305011897460, part number CA2193-4-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-189-7460 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011897460 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA2193-4-13 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.338 INCHES MINIMUM AND 1.358 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.508 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | 3 KEYWAYS 1.192 IN. MIN. AND 1.222 IN. MAX LONG,0.040 IN. MIN AND 0.044 IN. MAX WIDE MACHINED IN SHANK,BORE MACHINED IN THREAD END TO RECEIVE PLUG |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
