| Part Number : VT1693FL410 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-346-2268 (5305013462268) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 01-346-2268 (013462268) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number VT1693FL410, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305013462268, part number VT1693FL410 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VT1693FL410 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-346-2268 (5305013462268) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 013462268 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number VT1693FL410, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305013462268, part number VT1693FL410 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-346-2268 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013462268 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AIC984-L410 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.430 INCHES MINIMUM AND 0.501 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
