| Part Number : HT618-8-19 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-368-3230 (5305013683230) | |||
| Item Name : Screw Machine | CAGE Code : 92215 | ||
| NIIN : 01-368-3230 (013683230) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT618819 | |||
Thank you for taking an interest in part number HT618-8-19, that of which is listed with the description Screw Machine; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305013683230, part number HT618-8-19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT618-8-19 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-368-3230 (5305013683230) | |||
| Item Name : Screw Machine | CAGE Code : 92215 | ||
| NIIN : 013683230 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT618-8-19, that of which is listed with the description Screw Machine; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305013683230, part number HT618-8-19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-368-3230 Item PartTypeName: SCREW,MACHINE | 5305 | 013683230 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT618-8-19 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 2.654 INCHES MINIMUM AND 2.684 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| CYBK | SHANK SURFACE FINISH | 32.0 MICROINCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.222 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | 32.0 MICROINCHES |
| CYAU | SCREW MATERIAL | STEEL COMP 8740 OR STEEL COMP 4340 |
| CYBL | THREAD SURFACE FINISH | 32.0 MICROINCHES |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.781 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
