| Part Number : CA21351-4-4RS | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-488-3730 (5305014883730) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 01-488-3730 (014883730) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CA2135144RS | |||
Thank you for taking an interest in part number CA21351-4-4RS, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305014883730, part number CA21351-4-4RS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CA21351-4-4RS | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-488-3730 (5305014883730) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 014883730 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number CA21351-4-4RS, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305014883730, part number CA21351-4-4RS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-488-3730 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014883730 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA21351-4-4RS | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS 5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL |
| FEAT | SPECIAL FEATURES | DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD |
| AAVA | POINT DIAMETER | 0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD BOLT |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAWU | SINGLE SHEAR STRENGTH | 4140 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AGAV | III END ITEM IDENTIFICATION | F-22 RAPTOR |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASL | HEAD DIAMETER | 0.435 INCHES NOMINAL |
| SUPP | III SUPPLEMENTARY FEATURES | STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ABQJ | POINT STYLE | CHAMFER DOG |
| AASB | FASTENER LENGTH | 1.097 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 2845 POUNDS PER SQUARE INCH |
| AAUM | LOCKING FEATURE | DETENT RING LOCKING FEATURE |
| AASA | THREAD LENGTH | 0.567 INCHES MINIMUM AND 0.706 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.291 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AAUY | POINT LENGTH | 0.100 INCHES NOMINAL |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
