| Part Number : TX1026C-5AF | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-494-0560 (5305014940560) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06950 | ||
| NIIN : 01-494-0560 (014940560) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026C5AF | |||
Thank you for taking an interest in part number TX1026C-5AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305014940560, part number TX1026C-5AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026C-5AF | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-494-0560 (5305014940560) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06950 | ||
| NIIN : 014940560 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026C-5AF, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305014940560, part number TX1026C-5AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-494-0560 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014940560 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026C-5AF | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| FEAT | SPECIAL FEATURES | 125 KSI ULTIMATE SHEAR STRENGTH;IVD ALUMINUM COAT |
| AAUR | GRIP DIAMETER | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.372 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AASB | FASTENER LENGTH | 0.657 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INCONEL 718, PER AMS 5662 MFR REF 1ST MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 0.313 INCHES NOMINAL |
| ABQJ | POINT STYLE | FLAT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEGREE TENSION HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
