| Part Number : CA21369-6-16RS | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-537-4347 (5305015374347) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 29372 | ||
| NIIN : 01-537-4347 (015374347) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CA21369616RS | |||
Thank you for taking an interest in part number CA21369-6-16RS, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305015374347, part number CA21369-6-16RS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CA21369-6-16RS | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-537-4347 (5305015374347) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 29372 | ||
| NIIN : 015374347 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number CA21369-6-16RS, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305015374347, part number CA21369-6-16RS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-537-4347 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015374347 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA21369-6-16RS | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | Grip Diameter | 0.374 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| SUPP | Supplementary Features | STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BRFORE INSTALLING |
| AASK | Head Style | FLAT COUNTERSUNK |
| ABQJ | Point Style | CHAMFER DOG |
| AHYM | Nominal Thread Diameter | 0.375 INCHES |
| ANEE | Grip Length | 1.131 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| CQBC | Minimum Tensile Strength | 7360 POUNDS PER SQUARE INCH |
| AAUY | Point Length | 0.100 INCHES NOMINAL |
| AAWU | Single Shear Strength | 9400 POUNDS PER SQUARE INCH |
| CXCY | Part Name Assigned By Controlling Agency | STUD BOLT |
| MATT | Material | IRON ALLOY 660 OVERALL |
| AASL | Head Diameter | 0.672 INCHES NOMINAL |
| AGAV | End Item Identification | F-22 RAPTOR |
| AAJF | Thread Direction | RIGHT-HAND |
| FEAT | Special Features | DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.200 IN DIA, 0.800 IN DP; WIRE FORM HOLD OUT SPRING INSERTED; 2 LEAD THREAD. |
| AAUM | Locking Feature | DETENT RING LOCKING FEATURE |
| MDCL | Material Document And Classification | AMS5731 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OVERALL OR 5737 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OVERALL |
| AASB | Fastener Length | 2.260 INCHES NOMINAL |
| THSD | Thread Series Designator | UNF |
| AASA | Thread Length | 0.890 INCHES MINIMUM AND 1.029 INCHES MAXIMUM |
| CWDK | Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| CMLP | Thread Quantity Per Inch | 24 |
| MRC | Decoded Requirement | Clear Text Reply |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AAVA | Point Diameter | 0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
