| Part Number : C7985-3D6R | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5305-01-538-8107 (5305015388107) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 01-538-8107 (015388107) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: C79853D6R | |||
Thank you for taking an interest in part number C7985-3D6R, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305015388107, part number C7985-3D6R is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C7985-3D6R | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5305-01-538-8107 (5305015388107) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 015388107 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number C7985-3D6R, that of which is listed with the description Screw Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5305015388107, part number C7985-3D6R is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-538-8107 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015388107 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C7985-3D6R | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.276 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 0.723 INCHES MINIMUM AND 0.753 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 22000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.583 INCHES MINIMUM AND 0.613 INCHES MAXIMUM FIRST HOLE |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
