| Part Number : 3M33-8-19A | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5306-00-011-2515 (5306000112515) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 00-011-2515 (000112515) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3M33819A | |||
Thank you for taking an interest in part number 3M33-8-19A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306000112515, part number 3M33-8-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
320 matlogpel breda centrale
CAGE Code: H2851 |
400hz repair
CAGE Code: 03MS6 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
4 seasons counting systems inc
CAGE Code: 0MHX5 |
|
0mcc inc
CAGE Code: 12156 |
4 sure com inc
CAGE Code: 1LDH8 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
5dt inc
CAGE Code: 3BPF1 |
|
3m health care ltd
CAGE Code: U5989 |
3h products co
CAGE Code: 0CJ60 |
|
1 source electronics inc
CAGE Code: 551K1 |
3d pep
CAGE Code: FB830 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
3m health care service center
CAGE Code: 0UTW7 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
| Part Number : 3M33-8-19A | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5306-00-011-2515 (5306000112515) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 000112515 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 3M33-8-19A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306000112515, part number 3M33-8-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-011-2515 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 000112515 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M33-8-19A | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.781 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.953 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4986 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| ANEE | GRIP LENGTH | 1.188 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
