| Part Number : VS3133S16D33 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5306-01-278-1994 (5306012781994) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 01-278-1994 (012781994) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number VS3133S16D33, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306012781994, part number VS3133S16D33 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VS3133S16D33 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5306-01-278-1994 (5306012781994) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 012781994 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number VS3133S16D33, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306012781994, part number VS3133S16D33 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-278-1994 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012781994 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCG0009S16D-33 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.825 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.897 INCHES MINIMUM AND 2.927 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.539 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE |
| AAZH | HEAD MINOR DIAMETER | 1.715 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 1.000 INCHES |
| ANEE | GRIP LENGTH | 2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | 132000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.647 INCHES MINIMUM FIRST HOLE AND 2.677 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | S672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
