| Part Number : S4928913-7D24 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5306-01-418-5552 (5306014185552) | |||
| Item Name : Bolt Shear | CAGE Code : 06950 | ||
| NIIN : 01-418-5552 (014185552) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15903 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: S49289137D24 | |||
Thank you for taking an interest in part number S4928913-7D24, that of which is listed with the description Bolt Shear; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306014185552, part number S4928913-7D24 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : S4928913-7D24 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5306-01-418-5552 (5306014185552) | |||
| Item Name : Bolt Shear | CAGE Code : 06950 | ||
| NIIN : 014185552 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number S4928913-7D24, that of which is listed with the description Bolt Shear; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306014185552, part number S4928913-7D24 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-418-5552 Item PartTypeName: BOLT,SHEAR | 5306 | 014185552 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S4928913-7D24 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATT | Material | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| AAJD | Thread Class | 3A |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 1.829 INCHES NOMINAL SECOND HOLE |
| STDC | Surface Treatment Document And Classification | QQ-C-320 CL 2 TY 1 FED SPEC SINGLE TREATMENT RESPONSE GRIP |
| AHYM | Nominal Thread Diameter | 0.438 INCHES |
| SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
| AATB | Width Between Flats | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SFTT | Surface Treatment | CHROMIUM GRIP |
| AAUR | Grip Diameter | 0.4358 INCHES MINIMUM AND 0.4369 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| THSD | Thread Series Designator | UNJF |
| AASA | Thread Length | 0.453 INCHES NOMINAL |
| AAWB | Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| SFTT | Surface Treatment | CHROMIUM BEARING SURFACE OF HEAD |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 1.829 INCHES NOMINAL FIRST HOLE |
| CRHC | Hole Configuration Style | HEXAGON CORNERS |
| FEAT | Special Features | DRILLED HOLES IN SHANK SHALL BE PERPENDICULAR |
| AASB | Fastener Length | 1.953 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | QQ-C-320 CL 2 TY 1 FED SPEC SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD |
| AAJF | Thread Direction | RIGHT-HAND |
| AAUB | Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ANEE | Grip Length | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MRC | Decoded Requirement | Clear Text Reply |
| AASU | Head Height | 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| ASXK | Hole Quantity | 3 |
| CMLP | Thread Quantity Per Inch | 20 |
| BQDM | Hole Type | DRILLED |
| AAWB | Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM SECOND HOLE AND 0.116 INCHES MAXIMUM SECOND HOLE |
| AASK | Head Style | DISHED HEXAGON |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
