| Part Number : 3M1277E5D11A | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5306-01-599-4564 (5306015994564) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 01-599-4564 (015994564) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 3M1277E5D11A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306015994564, part number 3M1277E5D11A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1277E5D11A | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5306-01-599-4564 (5306015994564) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 92215 | ||
| NIIN : 015994564 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 3M1277E5D11A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5306015994564, part number 3M1277E5D11A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-599-4564 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015994564 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1277E5D11A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.156 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.4645 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.076 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.687 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-87132, TYPE 1, GRADE B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
