| Part Number : HL65PB-6-14 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN : 5320-01-425-1408 (5320014251408) | |||
| Item Name : Pin Rivet | CAGE Code : 92215 | ||
| NIIN : 01-425-1408 (014251408) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HL65PB614 | |||
Thank you for taking an interest in part number HL65PB-6-14, that of which is listed with the description Pin Rivet; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5320014251408, part number HL65PB-6-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1064100 alberta ltd
CAGE Code: L0C80 |
12 volt shop
CAGE Code: Z0JM2 |
|
3m purification inc
CAGE Code: 15472 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
3h industries inc
CAGE Code: 60754 |
31 mile equipment co
CAGE Code: 07PE3 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
3m italia spa
CAGE Code: A3445 |
|
400hz repair
CAGE Code: 03MS6 |
3m alaska
CAGE Code: 0NZU5 |
|
3 ring inc
CAGE Code: 68310 |
3 m federal systems dept
CAGE Code: 68352 |
|
5s components inc
CAGE Code: 1LNJ8 |
| Part Number : HL65PB-6-14 | Manufacturer : Alcoa Global Fasteners Inc | ||
| NSN Number : 5320-01-425-1408 (5320014251408) | |||
| Item Name : Pin Rivet | CAGE Code : 92215 | ||
| NIIN : 014251408 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number HL65PB-6-14, that of which is listed with the description Pin Rivet; Manufactured by Alcoa Global Fasteners Inc and listed alongside the NSN 5320014251408, part number HL65PB-6-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-425-1408 Item PartTypeName: PIN-RIVET | 5320 | 014251408 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HL659B-6-14 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | 73197-HL65 MANUFACTURERS STANDARD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQSX | SHEAR STRENGTH | 6130 DOUBLE POUNDS PER SQUARE INCH |
| ANEE | GRIP LENGTH | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AATB | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| FEAT | SPECIAL FEATURES | 1/64"" OVERSIZED. |
| AASB | FASTENER LENGTH | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| AAJD | THREAD CLASS | 3A |
| AAZG | HEAD MAJOR DIAMETER | 0.3765 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
