| Part Number : 121-2M-13 | Manufacturer : Allard Nazarian Group Inc | ||
| NSN : 5315-01-102-1041 (5315011021041) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 82005 | ||
| NIIN : 01-102-1041 (011021041) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1212M13 | |||
Thank you for taking an interest in part number 121-2M-13, that of which is listed with the description Pin Grooved Headed; Manufactured by Allard Nazarian Group Inc and listed alongside the NSN 5315011021041, part number 121-2M-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2001 humana press inc
CAGE Code: 34CH3 |
400hz repair
CAGE Code: 03MS6 |
|
4 s mfg
CAGE Code: 0D9C0 |
5 11 inc
CAGE Code: 3YEL6 |
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
498 msug
CAGE Code: 5VW08 |
|
3 ring inc
CAGE Code: 68310 |
3m purification inc
CAGE Code: 15472 |
|
21st century electronics inc
CAGE Code: 60092 |
3 d mfg inc
CAGE Code: 66484 |
|
3m belgium nv
CAGE Code: B2281 |
3m quante ag telekommunikation
CAGE Code: D2771 |
|
4 sure com inc
CAGE Code: 1LDH8 |
2kr systems llc
CAGE Code: 730Z2 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
| Part Number : 121-2M-13 | Manufacturer : Allard Nazarian Group Inc | ||
| NSN Number : 5315-01-102-1041 (5315011021041) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 82005 | ||
| NIIN : 011021041 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 121-2M-13, that of which is listed with the description Pin Grooved Headed; Manufactured by Allard Nazarian Group Inc and listed alongside the NSN 5315011021041, part number 121-2M-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-102-1041 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 011021041 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 121-2M-13 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.324 INCHES MINIMUM AND 0.329 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.173 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.390 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 0.333 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES LONG SHANK |
| HGTH | HEIGHT | 0.046 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | -1L-F-14072 E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
