| Part Number : RV251-4-3 | Manufacturer : Allfast Fastening Systems Inc | ||
| NSN : 5320-00-616-0379 (5320006160379) | |||
| Item Name : Rivet Blind | CAGE Code : 53551 | ||
| NIIN : 00-616-0379 (006160379) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: RV25143 | |||
Thank you for taking an interest in part number RV251-4-3, that of which is listed with the description Rivet Blind; Manufactured by Allfast Fastening Systems Inc and listed alongside the NSN 5320006160379, part number RV251-4-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RV251-4-3 | Manufacturer : Allfast Fastening Systems Inc | ||
| NSN Number : 5320-00-616-0379 (5320006160379) | |||
| Item Name : Rivet Blind | CAGE Code : 53551 | ||
| NIIN : 006160379 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number RV251-4-3, that of which is listed with the description Rivet Blind; Manufactured by Allfast Fastening Systems Inc and listed alongside the NSN 5320006160379, part number RV251-4-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-616-0379 Item PartTypeName: RIVET,BLIND | 5320 | 006160379 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS20601B4W3 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.295 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SELF-PLUGGING |
| AAZG | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| AGAV | END ITEM IDENTIFICATION | W/S: RADAR SET,LIGHTWEIGHT 3D (AN/TPS-59); AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02MJUL83)(AN/UYQ-3A); HELICOPTER,MH-53E; AIRCRAFT,(AC-130H,MC-130H,EC-130E,HC-130); HELICOPTER,CARRIER BASED ASW,SH-60F; SUPPORT EQUIPMENT,B-1 AIRCRA |
| ANEE | GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CQSX | SHEAR STRENGTH | 230 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 101.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | SLEEVE DYED ORANGE,W/SPECIAL PULLING HEAD |
| MATT | MATERIAL | ALUMINUM ALLOY 2017 STEM |
| MATT | MATERIAL | ALUMINUM ALLOY 5056 BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL OR OXIDE FILM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
