| Part Number : P342-0154-00 | Manufacturer : Allied Products Corp | ||
| NSN : 5305-00-151-1319 (5305001511319) | |||
| Item Name : Screw Machine | CAGE Code : 77250 | ||
| NIIN : 00-151-1319 (001511319) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: P342015400 | |||
Thank you for taking an interest in part number P342-0154-00, that of which is listed with the description Screw Machine; Manufactured by Allied Products Corp and listed alongside the NSN 5305001511319, part number P342-0154-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : P342-0154-00 | Manufacturer : Allied Products Corp | ||
| NSN Number : 5305-00-151-1319 (5305001511319) | |||
| Item Name : Screw Machine | CAGE Code : 77250 | ||
| NIIN : 001511319 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number P342-0154-00, that of which is listed with the description Screw Machine; Manufactured by Allied Products Corp and listed alongside the NSN 5305001511319, part number P342-0154-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-151-1319 Item PartTypeName: SCREW,MACHINE | 5305 | 001511319 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN505B4R6 | 3 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | W/S: FMS-A7 AIRCRAFT; AN/SRN-25(V) NAVIGATION RADIO SET; FMS-KNOW CLASS FF; HELICOPTER,MH-53E; HELICOPTER,ADVANCE ATTACK,AH-1W; ARC-182 AIRBORNE RADIO,COMMUNICATION; HELICOPTER,SEAHAWK,H-60; F4S AIRCRAFT; HELICOPTER,CARRIER BASED ASW |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 57000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
