| Part Number : 27963-2 | Manufacturer : Allied Signal Inc | ||
| NSN : 3020-00-709-0924 (3020007090924) | |||
| Item Name : Gear Worm | CAGE Code : 72599 | ||
| NIIN : 00-709-0924 (007090924) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05467 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 279632 | |||
Thank you for taking an interest in part number 27963-2, that of which is listed with the description Gear Worm; Manufactured by Allied Signal Inc and listed alongside the NSN 3020007090924, part number 27963-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 27963-2 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 3020-00-709-0924 (3020007090924) | |||
| Item Name : Gear Worm | CAGE Code : 72599 | ||
| NIIN : 007090924 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 27963-2, that of which is listed with the description Gear Worm; Manufactured by Allied Signal Inc and listed alongside the NSN 3020007090924, part number 27963-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-709-0924 Item PartTypeName: GEAR,WORM | 3020 | 007090924 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 27963-2 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWPZ | HELIX ANGLE | 12.1000 DEGREES |
| CWRS | BORE NOMINAL DIAMETER | 0.252 INCHES BOTH ENDS |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.4470 INCHES NOMINAL |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.2320 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN TRANSVERSELY THROUGH FACE |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.503 INCHES |
| CWPC | THREAD FORM QUANTITY | 3 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.106 INCHES |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.024 INCHES TRANSVERSELY THROUGH FACE |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STYL | STYLE DESIGNATOR | HUBLESS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
