| Part Number : 516158 | Manufacturer : Allied Signal Inc | ||
| NSN : 3020-00-734-3450 (3020007343450) | |||
| Item Name : Gear Bevel | CAGE Code : 72599 | ||
| NIIN : 00-734-3450 (007343450) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05463 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 516158, that of which is listed with the description Gear Bevel; Manufactured by Allied Signal Inc and listed alongside the NSN 3020007343450, part number 516158 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 516158 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 3020-00-734-3450 (3020007343450) | |||
| Item Name : Gear Bevel | CAGE Code : 72599 | ||
| NIIN : 007343450 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 516158, that of which is listed with the description Gear Bevel; Manufactured by Allied Signal Inc and listed alongside the NSN 3020007343450, part number 516158 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-734-3450 Item PartTypeName: GEAR,BEVEL | 3020 | 007343450 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 516158 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJLA | TEETH QUANTITY | 16 |
| CWFR | NOMINAL OVERALL LENGTH | 0.300 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWRS | BORE NOMINAL DIAMETER | 0.124 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.210 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.2500 INCHES NOMINAL |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.2910 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 13.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.142 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.041 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,BACK HUB PROTRUDING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
