| Part Number : 99586 | Manufacturer : Allied Signal Inc | ||
| NSN : 5305-00-608-6064 (5305006086064) | |||
| Item Name : Setscrew | CAGE Code : 72599 | ||
| NIIN : 00-608-6064 (006086064) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 99586, that of which is listed with the description Setscrew; Manufactured by Allied Signal Inc and listed alongside the NSN 5305006086064, part number 99586 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 99586 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 5305-00-608-6064 (5305006086064) | |||
| Item Name : Setscrew | CAGE Code : 72599 | ||
| NIIN : 006086064 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 99586, that of which is listed with the description Setscrew; Manufactured by Allied Signal Inc and listed alongside the NSN 5305006086064, part number 99586 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-608-6064 Item PartTypeName: SETSCREW | 5305 | 006086064 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 99586 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.047 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.062 INCHES NOMINAL |
| ABQJ | POINT STYLE | CONE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.125 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CWDK | POINT CHAMFER ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1010 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
