| Part Number : S8806-440-4 | Manufacturer : Allied Signal Inc | ||
| NSN : 5305-00-973-1883 (5305009731883) | |||
| Item Name : Screw Machine | CAGE Code : 72599 | ||
| NIIN : 00-973-1883 (009731883) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S88064404 | |||
Thank you for taking an interest in part number S8806-440-4, that of which is listed with the description Screw Machine; Manufactured by Allied Signal Inc and listed alongside the NSN 5305009731883, part number S8806-440-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : S8806-440-4 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 5305-00-973-1883 (5305009731883) | |||
| Item Name : Screw Machine | CAGE Code : 72599 | ||
| NIIN : 009731883 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number S8806-440-4, that of which is listed with the description Screw Machine; Manufactured by Allied Signal Inc and listed alongside the NSN 5305009731883, part number S8806-440-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-973-1883 Item PartTypeName: SCREW,MACHINE | 5305 | 009731883 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S8806-440-4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.121 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
