| Part Number : ST3M453-8D19 | Manufacturer : Allied Signal Inc | ||
| NSN : 5306-00-528-5515 (5306005285515) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 0VJ78 | ||
| NIIN : 00-528-5515 (005285515) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: ST3M4538D19 | |||
Thank you for taking an interest in part number ST3M453-8D19, that of which is listed with the description Bolt Close Tolerance; Manufactured by Allied Signal Inc and listed alongside the NSN 5306005285515, part number ST3M453-8D19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST3M453-8D19 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 5306-00-528-5515 (5306005285515) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 0VJ78 | ||
| NIIN : 005285515 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number ST3M453-8D19, that of which is listed with the description Bolt Close Tolerance; Manufactured by Allied Signal Inc and listed alongside the NSN 5306005285515, part number ST3M453-8D19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-528-5515 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 005285515 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 109453-8D19 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.623 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.821 INCHES MINIMUM AND 1.868 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AASU | HEAD HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| ANEE | GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.693 INCHES MINIMUM FIRST HOLE AND 1.750 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 08524-B-17019 MANUFACTURERS STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
