| Part Number : 3187182 | Manufacturer : Allied Signal Inc | ||
| NSN : 5340-00-434-8968 (5340004348968) | |||
| Item Name : Bracket Angle | CAGE Code : 77068 | ||
| NIIN : 00-434-8968 (004348968) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3187182, that of which is listed with the description Bracket Angle; Manufactured by Allied Signal Inc and listed alongside the NSN 5340004348968, part number 3187182 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3187182 | Manufacturer : Allied Signal Inc | ||
| NSN Number : 5340-00-434-8968 (5340004348968) | |||
| Item Name : Bracket Angle | CAGE Code : 77068 | ||
| NIIN : 004348968 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 3187182, that of which is listed with the description Bracket Angle; Manufactured by Allied Signal Inc and listed alongside the NSN 5340004348968, part number 3187182 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-434-8968 Item PartTypeName: BRACKET,ANGLE | 5340 | 004348968 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3187182 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 9.400 INCHES MINIMUM AND 9.460 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 8.935 INCHES MINIMUM AND 8.945 NOMINAL CENTIMETERS |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.215 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.020 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.020 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.100 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.260 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.062 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A,FINISH NO 1 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
