| Part Number : 9H-1-11 16 | Manufacturer : Altra Holdings Inc | ||
| NSN : 3130-01-239-3655 (3130012393655) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71041 | ||
| NIIN : 01-239-3655 (012393655) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 9H11116 | |||
Thank you for taking an interest in part number 9H-1-11 16, that of which is listed with the description Bearing Unit Ball; Manufactured by Altra Holdings Inc and listed alongside the NSN 3130012393655, part number 9H-1-11 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
3m health care ltd
CAGE Code: U5989 |
|
3d robotics llc
CAGE Code: 64TY6 |
5 11 inc
CAGE Code: 3YEL6 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
2eme regiment du materiel
CAGE Code: FARD5 |
2709th af vehicle control group
CAGE Code: 10994 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
4fastplumber llc
CAGE Code: 4P0W6 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
3w interface corp
CAGE Code: 4V367 |
12 volt shop
CAGE Code: Z0JM2 |
|
1064100 alberta ltd
CAGE Code: L0C80 |
| Part Number : 9H-1-11 16 | Manufacturer : Altra Holdings Inc | ||
| NSN Number : 3130-01-239-3655 (3130012393655) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71041 | ||
| NIIN : 012393655 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 9H-1-11 16, that of which is listed with the description Bearing Unit Ball; Manufactured by Altra Holdings Inc and listed alongside the NSN 3130012393655, part number 9H-1-11 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-239-3655 Item PartTypeName: BEARING UNIT,BALL | 3130 | 012393655 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9H-1-11/16 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.6875 INCHES MINIMUM AND 1.6887 INCHES MAXIMUM |
| ACYB | BASE THICKNESS | 1.312 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.562 INCHES MINIMUM AND 6.125 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 4.312 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.438 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.125 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.125 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
