| Part Number : MR-1-7 16 | Manufacturer : Altra Holdings Inc | ||
| NSN : 3130-01-350-7104 (3130013507104) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 71041 | ||
| NIIN : 01-350-7104 (013507104) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MR1716 | |||
Thank you for taking an interest in part number MR-1-7 16, that of which is listed with the description Bearing Unit Roller; Manufactured by Altra Holdings Inc and listed alongside the NSN 3130013507104, part number MR-1-7 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MR-1-7 16 | Manufacturer : Altra Holdings Inc | ||
| NSN Number : 3130-01-350-7104 (3130013507104) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 71041 | ||
| NIIN : 013507104 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number MR-1-7 16, that of which is listed with the description Bearing Unit Roller; Manufactured by Altra Holdings Inc and listed alongside the NSN 3130013507104, part number MR-1-7 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-350-7104 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 013507104 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 64624 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABVG | MOUNTING SLOT LENGTH | 1.188 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.125 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 3.000 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.375 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AKRF | SEAL TYPE | LABYRINTH |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.875 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL BEARINGIRON CAST HOUSING |
| ABTD | MOUNTING SLOT WIDTH | 0.562 INCHES NOMINAL |
| AGNF | BASE LENGTH | 1.969 INCHES NOMINAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ABXV | BORE DIAMETER | 1.4375 INCHES MINIMUM AND 1.4385 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 4.688 INCHES MINIMUM AND 5.938 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 3.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
