| Part Number : 804535 | Manufacturer : Am General Llc | ||
| NSN : 2530-00-741-2445 (2530007412445) | |||
| Item Name : Steering Gear | CAGE Code : 34623 | ||
| NIIN : 00-741-2445 (007412445) | |||
| FSC Code : 2530 Vehicular Brake Steering Axle Wheel and Track Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10854 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 804535, that of which is listed with the description Steering Gear; Manufactured by Am General Llc and listed alongside the NSN 2530007412445, part number 804535 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 804535 | Manufacturer : Am General Llc | ||
| NSN Number : 2530-00-741-2445 (2530007412445) | |||
| Item Name : Steering Gear | CAGE Code : 34623 | ||
| NIIN : 007412445 | |||
| FSC CODE : 2530 Vehicular Brake Steering Axle Wheel and Track Components | |||
Thank you for taking an interest in part number 804535, that of which is listed with the description Steering Gear; Manufactured by Am General Llc and listed alongside the NSN 2530007412445, part number 804535 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-741-2445 Item PartTypeName: ARM,STEERING GEAR | 2530 | 007412445 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 804535 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | 1.063 INCHES NOMINAL |
| AAWZ | COUNTERBORE DEPTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| ABGL | WIDTH | 0.620 INCHES NOMINAL |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| APGF | DESIGN TYPE | OFFSET |
| AXND | COUNTERBORE FEATURE | INCLUDED |
| ABMZ | DIAMETER | 0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM |
| ABND | TAPER LENGTH | 0.340 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 36 |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | 1.530 INCHES NOMINAL |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 0.720 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| CFBT | SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| CFBW | SMALL END MAJOR DIAMETER | 0.890 INCHES NOMINAL |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| CFBY | SMALL END TEETH DEPTH | 0.0375 INCHES NOMINAL |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 4.940 INCHES MINIMUM AND 5.060 INCHES MAXIMUM |
| CTKF | TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
