| Part Number : 52060 | Manufacturer : Am General Llc | ||
| NSN : 5305-00-011-3902 (5305000113902) | |||
| Item Name : Screw Machine | CAGE Code : 34623 | ||
| NIIN : 00-011-3902 (000113902) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 52060, that of which is listed with the description Screw Machine; Manufactured by Am General Llc and listed alongside the NSN 5305000113902, part number 52060 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 source electronics inc
CAGE Code: 551K1 |
3m health care ltd
CAGE Code: U5989 |
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
20th century fiberglass
CAGE Code: 80241 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
1 nation technology corp
CAGE Code: 08DH5 |
1 nation electronics llc
CAGE Code: 1XP36 |
|
4 r electro systems
CAGE Code: 1T600 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
2mb international
CAGE Code: FA7N3 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
394 test maintenance squadron sac
CAGE Code: 33044 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
| Part Number : 52060 | Manufacturer : Am General Llc | ||
| NSN Number : 5305-00-011-3902 (5305000113902) | |||
| Item Name : Screw Machine | CAGE Code : 34623 | ||
| NIIN : 000113902 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 52060, that of which is listed with the description Screw Machine; Manufactured by Am General Llc and listed alongside the NSN 5305000113902, part number 52060 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-011-3902 Item PartTypeName: SCREW,MACHINE | 5305 | 000113902 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 52060 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.438 INCHES NOMINAL |
| AASK | HEAD STYLE | ROUND |
| AASL | HEAD DIAMETER | 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1S STYLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
