Part Number : 3888K76 | Manufacturer : Ametek Inc | ||
NSN : 3040-00-853-7790 (3040008537790) | |||
Item Name : Gearshaft Spur | CAGE Code : 97424 | ||
NIIN : 00-853-7790 (008537790) | |||
FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
FSG Code : 30 Mechanical Power Transmission Equipment | |||
INC Code : 60541 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 3888K76, that of which is listed with the description Gearshaft Spur; Manufactured by Ametek Inc and listed alongside the NSN 3040008537790, part number 3888K76 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 3888K76 | Manufacturer : Ametek Inc | ||
NSN Number : 3040-00-853-7790 (3040008537790) | |||
Item Name : Gearshaft Spur | CAGE Code : 97424 | ||
NIIN : 008537790 | |||
FSC CODE : 3040 Miscellaneous Power Transmission Equipment |
Thank you for taking an interest in part number 3888K76, that of which is listed with the description Gearshaft Spur; Manufactured by Ametek Inc and listed alongside the NSN 3040008537790, part number 3888K76 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-853-7790 Item PartTypeName: GEARSHAFT,SPUR | 3040 | 008537790 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | ||||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3888K76 | 5 | 9 | D |
MRC | Criteria | Characteristic |
---|---|---|
AJWS | GEAR OUTSIDE DIAMETER | 0.133 INCHES NOMINAL |
ANJS | SHAFT END TYPE | PLAIN AND CROSS DRILLED PARTIAL |
AQPL | FACE WIDTH | 0.200 INCHES NOMINAL |
CRSJ | SHAFT TYPE | SHOULDERED |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CYEQ | SHAFT MATERIAL | STEEL |
CYER | GEAR MATERIAL | STEEL |
CYET | SHAFT LARGEST DIAMETER | 0.131 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |
CYEV | LONGER SHAFT SEGMENT LENGTH | 0.651 INCHES NOMINAL |
CYEW | SHAFT END SIZE | 0.055 INCHES AND 0.094 INCHES |
ABHP | OVERALL LENGTH | 1.296 INCHES MINIMUM AND 1.300 INCHES MAXIMUM |
AJLA | TEETH QUANTITY | 10 |
AQGH | DIAMETRAL PITCH | 90 |
CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote