| Part Number : 5839K70P004 | Manufacturer : Ametek Inc | ||
| NSN : 5905-01-285-5488 (5905012855488) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 97424 | ||
| NIIN : 01-285-5488 (012855488) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 5839K70P004, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Ametek Inc and listed alongside the NSN 5905012855488, part number 5839K70P004 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5839K70P004 | Manufacturer : Ametek Inc | ||
| NSN Number : 5905-01-285-5488 (5905012855488) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 97424 | ||
| NIIN : 012855488 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 5839K70P004, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Ametek Inc and listed alongside the NSN 5905012855488, part number 5839K70P004 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-285-5488 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 012855488 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4289 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.125 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.250 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | SPEC PROJ ERA |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 1.243 CUBIC INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 97424-5839K70 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
