| Part Number : 324095-1 | Manufacturer : Ammcon Corp | ||
| NSN : 5310-00-001-1847 (5310000011847) | |||
| Item Name : Nut Plain Slotted Hexagon | CAGE Code : 6W889 | ||
| NIIN : 00-001-1847 (000011847) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01859 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3240951 | |||
Thank you for taking an interest in part number 324095-1, that of which is listed with the description Nut Plain Slotted Hexagon; Manufactured by Ammcon Corp and listed alongside the NSN 5310000011847, part number 324095-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 324095-1 | Manufacturer : Ammcon Corp | ||
| NSN Number : 5310-00-001-1847 (5310000011847) | |||
| Item Name : Nut Plain Slotted Hexagon | CAGE Code : 6W889 | ||
| NIIN : 000011847 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 324095-1, that of which is listed with the description Nut Plain Slotted Hexagon; Manufactured by Ammcon Corp and listed alongside the NSN 5310000011847, part number 324095-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-001-1847 Item PartTypeName: NUT,PLAIN,SLOTTED,HEXAGON | 5310 | 000011847 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 324095-1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | SLOTTED,HEXAGON |
| ADEA | NUT HEIGHT | 0.562 NOMINAL INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.738 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | SPCL |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| FEAT | SPECIAL FEATURES | MATERIAL PER MIL-S-5000 OR MIL-S-6049; NUT HAS ROCKWELL HARDNESS OF C34-C39 IN ACCORDANCE WITH MIL-H-6875 CLASS A; 100 MAGNETIC PARTICLE INSPECTION PER MIL-I-6868 PERFORMED BY BOTH CIR. AND LONG. METHOD,THE WET OR DRY PROCESS WITH EITHER |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| SPCL | SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE,PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILI |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
