| Part Number : SSS725P | Manufacturer : Analog Devices Inc | ||
| NSN : 5962-01-024-9519 (5962010249519) | |||
| Item Name : Microcircuit Linear | CAGE Code : 06665 | ||
| NIIN : 01-024-9519 (010249519) | |||
| FSC Code : 5962 Microcircuits Electronic | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 31778 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number SSS725P, that of which is listed with the description Microcircuit Linear; Manufactured by Analog Devices Inc and listed alongside the NSN 5962010249519, part number SSS725P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SSS725P | Manufacturer : Analog Devices Inc | ||
| NSN Number : 5962-01-024-9519 (5962010249519) | |||
| Item Name : Microcircuit Linear | CAGE Code : 06665 | ||
| NIIN : 010249519 | |||
| FSC CODE : 5962 Microcircuits Electronic | |||
Thank you for taking an interest in part number SSS725P, that of which is listed with the description Microcircuit Linear; Manufactured by Analog Devices Inc and listed alongside the NSN 5962010249519, part number SSS725P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-024-9519 Item PartTypeName: MICROCIRCUIT,LINEAR | 5962 | 010249519 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | B | U | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 971094-321 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.145 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 300.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | CIRCUIT CARD ASSY FSCM 06481 P/N 791800 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND HIGH GAIN AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | 2 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 AMPLIFIER,OPERATIONAL,INSTRUMENTATION |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 22.0 VOLTS MAXIMUM POWER SOURCE |
| TEST | TEST DATA DOCUMENT | 06481-971094 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
