| Part Number : 719-006-103 | Manufacturer : Andrew Scicomm Inc | ||
| NSN : 5905-01-103-3233 (5905011033233) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 17903 | ||
| NIIN : 01-103-3233 (011033233) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 719006103 | |||
Thank you for taking an interest in part number 719-006-103, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Andrew Scicomm Inc and listed alongside the NSN 5905011033233, part number 719-006-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 719-006-103 | Manufacturer : Andrew Scicomm Inc | ||
| NSN Number : 5905-01-103-3233 (5905011033233) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 17903 | ||
| NIIN : 011033233 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 719-006-103, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Andrew Scicomm Inc and listed alongside the NSN 5905011033233, part number 719-006-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-103-3233 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011033233 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3006P-1-103 | 3 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.165 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.095 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | AN/TSC-62A |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 96238-41000450 MANUFACTURERS SOURCE CONTROL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
