1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

MP10 part number of Angstrohm Precision Of California Inc - Order Now!

Part Number : MP10 Manufacturer : Angstrohm Precision Of California Inc
NSN : 5905-01-296-7522 (5905012967522)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 57476
NIIN : 01-296-7522  (012967522)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37406
NCB Code : 01 Country : USA

Thank you for taking an interest in part number MP10, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Angstrohm Precision Of California Inc and listed alongside the NSN 5905012967522, part number MP10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
502112-2
RFQ
P0544-PUL
RFQ

MP10 part number of Angstrohm Precision Of California Inc - Order Now!

Part Number : MP10 Manufacturer : Angstrohm Precision Of California Inc
NSN Number : 5905-01-296-7522 (5905012967522)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 57476
NIIN : 012967522
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number MP10, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Angstrohm Precision Of California Inc and listed alongside the NSN 5905012967522, part number MP10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number MP10

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number MP10 with NSN 5905-01-296-7522, 5905012967522

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-296-7522

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050129675220N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
MP10A1000525

Characteristics Data of NSN 5905-01-296-7522, 5905012967522

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABNBFIRST FLAT LENGTH0.375 INCHES NOMINAL
ABNCFLAT HEIGHT0.250 INCHES NOMINAL
ABPMBODY DIAMETER1.562 INCHES NOMINAL
ABWVSHAFT DIAMETER0.281 INCHES NOMINAL
ABXFSHAFT LENGTH0.844 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.344 INCHES NOMINAL
ADAQBODY LENGTH1.375 INCHES NOMINAL
AEDXSHAFT STYLEROUND,FLATTED
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION295.0 MINIMUM AND 305.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE40.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE40.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE240.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AEFPNONTURN DEVICE RADIUS0.500 INCHES NOMINAL
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATIONCONTROL CONSO
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CBMECUBIC MEASURE2.635 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 MINIMUM AND 305.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER340.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS25.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER45.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Frequently Asked Questions (FAQ): MP10 NSN Part

What Type of Item Is Part Number MP10?
  • Part Number MP10 is an "Resistor Variable Wire Wound Non" manufactured by Angstrohm Precision Of California Inc Managed with the NSN 5905-01-296-7522. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number MP10?
  • Resistor Variable Wire Wound Non To receive a competitive quote for items with the part number MP10, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 57476 Important When Purchasing Part Number MP10?
  • CAGE Code 57476 signifies Angstrohm Precision Of California Inc Managed as the manufacturer of Part Number MP10, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-01-296-7522 Paired with Part Number MP10?
  • Part Number MP10 is the identification assigned to the item by Angstrohm Precision Of California Inc Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-01-296-7522 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up