| Part Number : 7C34-24-2A | Manufacturer : Arconic Global Fasteners And Rings | ||
| NSN : 5340-01-127-7195 (5340011277195) | |||
| Item Name : Clamp Loop | CAGE Code : 71286 | ||
| NIIN : 01-127-7195 (011277195) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 7C34242A | |||
Thank you for taking an interest in part number 7C34-24-2A, that of which is listed with the description Clamp Loop; Manufactured by Arconic Global Fasteners And Rings and listed alongside the NSN 5340011277195, part number 7C34-24-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2 mb distribution
CAGE Code: FAH01 |
1 source electronics inc
CAGE Code: 551K1 |
|
2001 micro systemation ab
CAGE Code: SK396 |
4 m company inc
CAGE Code: 1K407,57268 |
|
3m unitek corporation
CAGE Code: 90444 |
3m health care service center
CAGE Code: 0UTW7 |
|
3075109 canada inc
CAGE Code: L09L0 |
31 mile equipment co
CAGE Code: 07PE3 |
|
1db metravib
CAGE Code: FAQ34 |
4 cs electronic packaging inc
CAGE Code: 60744 |
|
3 vets inc
CAGE Code: 1MK20 |
3m alaska
CAGE Code: 0NZU5 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
| Part Number : 7C34-24-2A | Manufacturer : Arconic Global Fasteners And Rings | ||
| NSN Number : 5340-01-127-7195 (5340011277195) | |||
| Item Name : Clamp Loop | CAGE Code : 71286 | ||
| NIIN : 011277195 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 7C34-24-2A, that of which is listed with the description Clamp Loop; Manufactured by Arconic Global Fasteners And Rings and listed alongside the NSN 5340011277195, part number 7C34-24-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-127-7195 Item PartTypeName: CLAMP,LOOP | 5340 | 011277195 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST9M427W24 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABMK | OVERALL WIDTH | 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| AXWJ | FASTENING DEVICE TYPE | STUD TURNLOCK |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.570 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 305 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
