| Part Number : 7C34-6-2A | Manufacturer : Arconic Global Fasteners And Rings | ||
| NSN : 5340-01-296-2989 (5340012962989) | |||
| Item Name : Clamp Loop | CAGE Code : 71286 | ||
| NIIN : 01-296-2989 (012962989) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 7C3462A | |||
Thank you for taking an interest in part number 7C34-6-2A, that of which is listed with the description Clamp Loop; Manufactured by Arconic Global Fasteners And Rings and listed alongside the NSN 5340012962989, part number 7C34-6-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7C34-6-2A | Manufacturer : Arconic Global Fasteners And Rings | ||
| NSN Number : 5340-01-296-2989 (5340012962989) | |||
| Item Name : Clamp Loop | CAGE Code : 71286 | ||
| NIIN : 012962989 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 7C34-6-2A, that of which is listed with the description Clamp Loop; Manufactured by Arconic Global Fasteners And Rings and listed alongside the NSN 5340012962989, part number 7C34-6-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-296-2989 Item PartTypeName: CLAMP,LOOP | 5340 | 012962989 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7C34-6-2A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABMK | OVERALL WIDTH | 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.020 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | WING HEAD; FURNISHED W/STUD AND SPRING,CADMIUM PLATE,QQ-P-416,CL 1,TY 2,OLIVE DRAB |
| MATT | MATERIAL | STEEL COMP 305 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
