| Part Number : 12006408 | Manufacturer : Army United States Department Of The | ||
| NSN : 5315-01-038-2356 (5315010382356) | |||
| Item Name : Pin Grooved Headles | CAGE Code : 19204 | ||
| NIIN : 01-038-2356 (010382356) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 12006408, that of which is listed with the description Pin Grooved Headles; Manufactured by Army United States Department Of The and listed alongside the NSN 5315010382356, part number 12006408 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 12006408 | Manufacturer : Army United States Department Of The | ||
| NSN Number : 5315-01-038-2356 (5315010382356) | |||
| Item Name : Pin Grooved Headles | CAGE Code : 19204 | ||
| NIIN : 010382356 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 12006408, that of which is listed with the description Pin Grooved Headles; Manufactured by Army United States Department Of The and listed alongside the NSN 5315010382356, part number 12006408 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-038-2356 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 010382356 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12006408 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 3.400 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.511 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 2.540 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.360 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.039 INCHES NOMINAL |
| ABPD | SECOND UNDERCUT WIDTH | 0.039 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.182 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.140 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES SHANK END |
| CTHC | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | BOTH UNDERCUTS CHAMFERED AT 45 DEG FROM UNDERCUT BOTTOM ON SIDE TOWARDSMIDDLE OF PIN HAS RING AS HANDLE IN 0.190 IN DIA HOLE,RING 1.380 ID FROM 0.120 IN DIA WIRE |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
